Smoke extractor chimney puller –

How to solve smoke coming out of the chimney

Il road tow it is an essential element to best solve the problem of leakage smoke from the chimney.

Placed on the chimney cap, the chimney puller or smoke extractor is a device that allows the chimney to function correctly, eliminating the smell of smoke.

Thanks to aspirators it is possible optimize the draftguaranteeing perfect regulation of the suction speed.
By avoiding dispersing smoke, the risk of poisoning or fire is reduced.

Correct functioning of the flue: draft

The draft mechanism is based on rising hot combustion fumes towards the outside of the flue, having less pressure.

Going up, the smoke it cools and slows down its speed until it reaches the same outside temperature.

Very often, however, one could run the risk that, for a cooling too quickthe smoke remains trapped inside of the heated environment causing a variety of problems, including fires or carbon monoxide poisoning.

It is therefore necessary that the draft takes place in optimal conditions thanks to thermal insulation of the flue and the presence inside it of camera d’aria.

Environmental conditions should also not be underestimated, including external humidity, which can interfere with the escape of smoke.

It is precisely to overcome this problem that the chimney puller is used.

Chimney pull efficiency

The chimney puller, in addition to the forced draft which ensures effective smoke extraction even in situations of malfunction, It has low consumption.

Its activation or deactivation can be easily managed according to the user’s needs and is particularly advantageous in very windy situations.

Installing the device is simple and only requires being connected to the electrical control unitlocated near the fireplace hood.
There are different variants of electric fireplace pullers on the market, with prices that can be adapted to different needs.

Despite being a functional and refined piece of equipment, its cost is accessible, oscillating between 200 and 400 euros for basic models, up to 600 euro for the more complex ones.
However, the use of the smoke extractor should not make us forget the potential efficiency problems of the chimney.

The use of this mechanism could cause blockages which would compromise the correct evacuation of fumes.

Therefore, it is essential not to neglect care and maintenance of the whole chimney.

Advantages of the smoke extractor

The chimney puller offers several advantages appreciable:

• it’s a device very quiet;
• stands out for its simplicity of installation and assembly;
• during rainy days, prevents water from infiltrating in the fireplace, preserving its integrity;
• can also be used in summer months to favor the air exchangeimproving the quality of the internal environment;
• eliminates smoke odors and allows quick cleaning of the fireplace, helping to maintain a fresh and odor-free environment;
• provides effective protection from birds and rodents;
• guarantees recirculation continuous flow of air, preventing the accumulation of smoke inside the home.

Types of chimney pulls

A type of chimney puller is the tiracamino TC 10 in sheet steel proposed by Vortice Elettrosociali Spa.

Designed to work at a continuous temperature of 200°C, it has a double rotation speed which can be varied via a converter.

This chimney puller offers a maximum flow rate of 750 m3/h.

Vortice TC10 fireplace puller

The protection and anti-bird grid is made with electrowelded steel rings and painted with black epoxy paint.

It is supplied with a basic subframe to secure the appliance to the chimney and a steel safety cable to anchor the machine after installation.

Smoke extractor for fireplaces

Il TIRAFUMO Of DYNAIR it is a reliable and versatile solution for smoke evacuation. It can handle an air flow with a maximum temperature of 200°C continuously.
But it is not recommended to use it on flues with a section smaller than 150 x 150 mm (equivalent to a diameter of 170 mm).

Il TIRAFUMO it is available in two versions:

• in steel painted with epoxy powders (SMOKE EXTRACTOR N);
• in rame (TYRAPHUM NC).

TIRAFUMO di Dynar

It features a anti-volatile protectionstainless steel screws and a hat with slots to improve ventilation of the engine compartment.

Its self-cleaning backward blade impeller, balanced according to ISO 1940 standards, ensures efficient and reliable operation.

End of article

Smoke extractor chimney puller: who to contact?

The company Gemi Elettronica Srlfounded in 1983, has always stood out for its advanced technologies and professionalism. Gemi, attentive to the customer, offers a unique opportunity: the possibility of trying the products for 100 days with a full refund.
The company actively collaborates with the University of Basilicata and Basilicata Innovazione.

Furthermore, he is always looking for innovative products and cutting-edge thanks to collaborations with professional institutes and universities.

If you are looking for a high quality electric wild boar fence, Gemi Electronics it is the ideal choice.
For more information, visit the website!