For those who want elegance, the front corner of the V1 is also available with a wooden side panel made of either ash or walnut.
APNX (Advanced Performance Nexus), which specializes in PC cases and cooling, has released a new V1 mid-tower case, which features a beveled air intake angle on the front right. If desired, you can also get a wooden sideboard in the corner, which is made of either ash or walnut wood. There are tempered glass panels on the left and front to create a panoramic effect.
The cooling potential of the V1 is as much as three 360 mm liquid coolers at the top, in the beveled front corner and also at the bottom, although the manufacturer does not recommend the bottom installation of the liquid cooler. In addition, the vertical layout of the motherboard allows the user to install a push-pull fan configuration on the ceiling cooler. A total of ten standard 120 mm fans can fit in the case.
The V1 is designed so that its panels can be removed without tools, and the dual-chamber design leaves room for cable management, power supply and mass memories. In addition, the case has adjustment possibilities for the heaviest graphics cards to prevent hanging, and APNX also offers a separately purchased vertical graphics card mounting kit with PCIe 5.0 support.
APNX V1 Specifications:
- External dimensions: 500 × 486 × 290 mm (L × W × H)
- Materials: Steel, tempered glass, ABS plastic/wood
- Solvents: Mini-ITX, mATX, ATX
- Fan support:
- Front right: 3 × 120 mm / 3 × 140 mm / 2 × 160 mm
- On the ceiling: 3 × 120 mm / 2 × 140 mm
- At the bottom: 3 × 120 mm / 2 × 140 mm
- Rear: 1 × 120 mm
- Radiator support:
- Front right: 280 / 360 mm
- In the ceiling: 280 / 360 mm
- At the bottom: 280 / 360 mm
- Back: 120 mm
- Maximum height of processor cooler: 170 mm
- Maximum length of video controller: 395 mm
- Maximum length of the power supply: 220 mm
- I/O-panel:
- 1 × USB-C 3.2 Gen 2×2
- 2 × USB-A 3.1 Gen 1
- 3.5 mm headphone-microphone combo connection
The APNX V1 will be available in black, white and monochrome. All three colors are also available in a version with a wooden front corner in addition to the plastic one. It is not yet known when exactly the V1 will go on sale in Finland, but the recommended price is 129.90 euros.
Source: Product page, TechPowerUp
Source: www.io-tech.fi
