Minilift: which one to choose –

Mini lift to overcome architectural barriers

The law 13 of 9 January 1989, «Provisions to encourage the overcoming of architectural barriers in private buildings»provides in the art. 1, paragraph 3 letter d) the installation, in the case of properties with more than three levels above ground, of a in the mini-elevator for each staircase reachable by a ramp without steps of adequate slope or standard internal or external liftswhere dimensions allow.
For them new buildings the obligation to promote theaccessibility to properties achieved is essential, however in the case of renovationssituations must be evaluated on a case-by-case basis, making use of expert technicians in the sector who will be able to evaluate the feasibility or otherwise of installing an elevator system.

During the analysis phase, a series of collateral aspects must be evaluated, such as functional changes and architectural which will be added to the property, but attention must also be paid to protect air rights e luce boasted by the various condominiums of the building in question, especially if it is an installation to be carried out inside a condominium courtyard overlooked by various owners.

Installation interventions mini elevators within condominium buildings they are always very frequent.

Mini elevators: Kone MySpace installation in condominium

For example, a recurring case is that of a three-story buildingconsisting of ground, first and second floors, covered with a pitched roof used as an attic, in which the intended use of the latter is changed, making it habitable and creating a new residential real estate unit.

After this renovation and change of use we are no longer talking about three floors, but about four actually habitable floors, and it is precisely in this specific case that theobligation to provide external or internal lifts to the building generally obtained in one metal frame structure.

Mini elevator push button panel – KONE

The elevator design must be designed in such a way that the cabincan be easily enjoyed by all occupants of the building including people with reduced motor skills and sensorial.

The cabin in question must have minimum dimensions (different for a new construction and for a renovation) and a series of specific characteristics that concern the width and type of the doors, the positioning of the control panel and the presence of the various safety devices.

All this to try to create an elevator with minimal impact that is 100% functional and comfortable.

Elevators in residential environments

If you are in a residential area, it is possible to set up an apartment lift system for your personal needs, regardless of the number of floors to be served, their intended use and the tenants who occupy them.

Electric harmonic from the Kone Motus line open

Precisely to satisfy this need, the companyKONEhe conceivedElectric Harmonic from the KONE Motus linewhich allows everyone to move in absolute safety and comfort, fully experiencing the spaces of the house, without having to worry about climbing stairs. Armonico Elettrico by KONE Motus, designed with the aim of being used inside multi-storey villas and apartments, is functional and extremely silent, this home lift model is designed precisely to allow its use at any time of the day.

By installing such a system it is possibleovercome architectural barriersnot only at home, but also at work and in spaces frequented during free time, because they are also designed for professional and commercial environments.

The advantages of Armonico Elettrico are truly many, including:

• lower energy consumptionto those of many household appliances
• safety guarantee;because it is equipped with two high efficiency batteries which, also in case of blackoutt extended, allow you to carry out up to 30 runs
• reduced spaces since all the main components of the minilift are located in the hoistway
• ride comfort
• respect for the environment because it doesn’t use oil
• speed of installation since just a few masonry works are needed to create the pit and the head, without having to intervene on the structure of the building

Armonico Elettrico can be customized by fitting perfectly in any environment. To meet all your needs, you can choose walls in plasticized sheet metal, stainless steel or opaque or mirrored glass.

Electric harmonic from the Kone Motus line closed

Furthermore, the floor can be in PUR Pearl, which resists scratches, trampling and wear, or in wood-effect laminate, which gives ideal continuity with the floor of the house. Armonico by KONE Motus is also designed with a view to limiting the energy consumption, in fact the amount of energy needed for operation is equal to a common household appliance and can be connected to any light point in the house with a 230 V power supply.Cabina di un miniascensore

Armonico by KONE Motus is also designed with a view to limiting the energy consumptionIn fact, the amount of energy needed for operation is equal to a common household appliance and can be connected to any light point in the house with a 230 V power supply.

Without doors

The version of Armonico Elettrico without doors in the cabin works according to the standard “to man present”, i.e. the user must keep the button pressed for the entire duration of the ride. While from the floor the maneuver is automatic, i.e. just press the button for a moment to call the system.

Automatic folding doors

In the case of the version with automatic folding doors it is not necessary to keep the button pressed during the ride.

Automatic sliding doors

Electric Harmonic with horizontally sliding automatic doors is equipped with an electronic keypad foropening and the commanded closing of the doors. Doors and frame are available in different materials: RAL painted steel and textured surface finish, plasticized sheet metal, stainless steel orTotal glass”.

Outdoor version

Armonico Elettrico can be installed outside the building. It is possible to opt for aluminum infills so that the system fits in harmony with the style of the building, or for glass infills that give elegance to the facade.
In order to resist bad weather and atmospheric agents, the materials are treated with special paints.

Indoor version

In addition to the customization of the cabin doors, different materials are also available for the floor and the walls of the mini lift for interiors. The door, floor and back wall can be made of different materials.

Furthermore, it is also possible to choose between multiple finishes for the ceiling, button panel and swing door handle.
Furthermore, it is also possible to choose between multiple finishes for the ceiling, button panel and swing door handle.

End of article

THE EDITORIAL TEAM RECOMMENDS

For over a century it has made its commitment to understanding customer needs by providing elevators, escalators and moving walkways and automatic doors for buildings at the forefront of the sector, as well as innovative solutions for the modernization and maintenance of systems.

The indoor lift models for the disabled in the KONE Motus line comply with the Machinery Directive 2006/42/EC (Legislative Decree 27 January 2010, n.17) and the EN 81-41 standard. To know the details of the line KONE Motion you can contact the toll-free number800 455677 available every day from 8:00 to 18:00, or you can visit the site www.konemotus.it.