Two glass panels and tilted front; here is the APNX V1 midi tower

The motorhome boasts a highly variable interior, and three of its six versions come with wooden inserts.

Hirdetés

APNX is the latest, split vertically from the inside V1 its case is an interesting piece, because although the tempered glass plate on the left and front is watching, the right edge of its front is tilted at 45 degrees, so that the CPU and GPU can directly receive the refreshing air currents.


(+)

The 485.5 mm high, 290 mm wide, and 500 mm deep, 7-slot solution can accept Mini-ITX, microATX or ATX format boards, and for the push-pull configuration radiators, there is a 90 mm wide space behind the motherboard tray, which can be fixed vertically in two positions can be found with Velcro straps for cable management. Processor coolers can fit up to a height of 170 mm, video cards – without a front radiator – up to a length of 395 mm in the panoramic interior, while the number of built-in fans is ten, and up to two 160 mm units can be installed in the front.


(+)

With regard to the already mentioned radiators, four is the magic number, while with regard to classic storage devices, we can think of four 2.5-inch drives, plus two 2.5- or 3.5-inch drives, thanks to the frame that can be opened by hinges. Our graphic controller, which can be put into operation with the orientation set with the optional kit, comes with a support that can be regulated in two ways, and the cleanliness of our components is ensured by four dust filter inserts. Most of the roof plate, as well as half of the steel panel installed on the right side, is covered by a metal mesh, and the I/O island has a 20 Gbps USB 3.2 Gen 2×2 Type-C port, two USB 3.2 Gen 1 Type-A connectors, and a 3.5 mm combojack camped.


(+)

The product is available in natural black (V1-BK-v1), snow white (V1-WT-v1), white/black (V1-BW-v1), as well as in their versions with a wooden inlay front (V1-W-BK-v1, V1-W -WT-v1, V1-W-BW-v1).

Source: prohardver.hu