Wireless home burglar alarm –

How to choose a wireless home alarm

It is statistically proven (we are talking about 80% of cases) that the installation of theburglar alarm system for the house is carried out only after having suffered a theft or an attempted intrusion. Never as in these circumstances, however, is prevention better than intervening after the fact.

Just choose thehouse alarmwhich best meets our needs. The cost of an alarm system, in fact, is decidedly lower than the patrimonial damage that one can suffer following a theft and the psychological and moral one due to the violation of one’s privacy and the theft of objects to which one may be attached for personal reasons.
When choosing what type of burglar alarm to install for your home, you are faced with the first option: a traditional alarm system. via cable or wireless (wireless)?

To decide, it is advisable to first check whether there is a row systemthat is, a system of channels where to pass the burglar alarm cables. If this is not present, it must be considered that the work required to install this type of alarm will be more expensive and will create greater inconvenience in the home, so it may be appropriate to opt for a wireless burglar alarm.

Always in progress choice of system to adopt, it may be useful to make a mapping of the house, highlighting the most vulnerable openings and those that have perhaps already been the subject of break-ins. These points will need greater protection.
Even one list of goods to protect will be important for choosing the best system.

Finally, it will be necessary to take into account the budget available to invest, remembering however that a solution that is too cheap could prove to be insufficiently effective. To this end, it is sufficient to examine the functions that characterize a system, excluding those that are not suitable for your case, which would only represent an unnecessary expense.

Typically, all alarm systems have a number of standard functions, such as partializationthat is, the possibility of protecting only one part of the house, excluding another, or the possibility of connecting to a telephone dialer that sends a call to certain numbers in the event the alarm goes off. It is not so much necessary to dwell on these aspects, but on those more particular and specific characteristics that can make the difference.

In this regard, it is always advisable to ask for detailed estimates and to obtain information on the subject on specialized blogs such as that of antifurtocasa.info

What does a wireless home alarm look like?

As regards the alarms without purpose, better known as wireless alarms, we remember that the main parts that compose them are the following:

Wireless alarm control panel

It is the brain of the system, its software manages the information sent and received by the system components, in case of intrusion it sends the signal to the siren and to the GSM dialer who will be responsible for contacting the owner of the house by telephone.

Wireless alarm control unit

In wireless control units it incorporates a display, a keypad and an internal siren. Installing it in an area near the entrance door allows the inhabitants of the house to activate and deactivate the burglar alarm directly from the control unit keypad.

Although it is equipped with an anti-tamper system, it is preferable to install it in a hidden area. For GSM control units, check that there is a GSM signal at the point where it is to be fixed.

Wireless home alarm opening sensors

Also said magnetic contactsconsist of two small magnets to be applied one on the opening leaf and the other on the frame. When the window is opened and the two contacts are separated they send the signal to the control unit which triggers the alarm.

Wireless Burglar Alarm Motion Sensors for Home Wireless Home Burglar Alarm by Antifurto365

They come in a variety of shapes and colors to suit any environment.

Home alarm system motion sensors

Also said volumetric detectors They are the eyes of the system, they detect the presence of the intruder by activating the alarm. They are positioned in strategic passage points. They can have one, two or more technologies. The most used is the infrared technology which detects the temperature variation generated by a human body.

Wireless Home Burglar Alarm Siren

In case of intrusion, it rings outside the house to warn the neighbors and disturb the intruder.

Wireless Alarm Control Devices

They are used to arm and disarm the alarm. Remote control, keyboard or inserter. Remotely, the App per Smartphone.

Wireless Home Alarm Remote Controls

However, to ensure maximum safety, it is necessary to verify that the systems are also equipped with the following functions:

Supervision of a wireless burglar alarm

The control panel and sensors must be supervised. Supervision of a wireless burglar alarm monitors the battery charge level of all the system components and, above all, their correct functioning.

Supervise wireless burglar alarm Wireless home burglar alarm by Antifurto365

Supervision in a burglar alarm is essential to always be sure that all the components of the system are working properly and that their batteries are charged.

Triple frequency guard, greater reliability for the wireless system of Antifurto 365

The alarm signal transmitted by the sensors is sent on multiple radio communication channels. Therefore, if one of the signals is interrupted, the other frequency can replace it, still communicating the alarm to the control unit and triggering the siren.

Triple Frequency Wireless Burglar Alarm Wireless Home Burglar Alarm by Antifurto365

The triple frequency It therefore guarantees greater reliability and safety of signal transmission/reception.

Increased security with alarm anti-jamming

Detects the jamming of one or more radio frequencies induced by an attacker.

Anti jamming wireless alarm Wireless home burglar alarm by Antifurto365

If the alarm signal sent by a sensor to the control unit is obstructed, the anti-jamming technology detects the attempted tampering of the system and triggers the alarm. In modern control units, the system also sends the signal with a voice call, SMS and via the Internet.

Rolling-Code Radio Signals to Protect the Alarm System

The components of a wireless alarm exchange information using frequencies in the air. This information is potentially interceptable by a skilled thief with the right equipment.
The risk is greater if the radio signals are not encrypted. To limit this danger, encryption is used. radio signals of type rolling codethat is, codes that change with each transmission in the air.

In practice, even if the code transmitted via radio from the remote control is intercepted, it would not be
usable because the next time the valid code will be another one.

Built-in Wi-Fi interface for wireless home alarm

The integrated and stable WiFi module allows you to connect the control unit to the Internet. The Internet interconnection allows a real-time dialogue of the wireless alarm system with your Smartphone and PC.

Wi-Fi control unit installation

In this way the control unit can be managed remotely from anywhere as long as there is internet coverage.

Wireless Home Alarm System Support and Warranty

Choosing a product with warranty extensions of at least 5-10 years is synonymous with the quality of the product and the components used.

The wireless burglar alarms they can also be purchased online in DIY home alarm kit accompanied by all the instructions for their correct assembly and use, which are sent already configured and ready for use and are specific for end users without particular skills.

On the site Antifurto365in addition to purchasing these kits, you can also find a video – manual to get an idea of ​​the procedures to follow for assembling the innovative KIT iALARM:

Wireless home burglar alarm: reviews

Antifurto365 collects on its website the reviews of customers who have purchased a wireless home burglar alarm.

The evaluations are published directly on the product page itself. The feedback received is synonymous with clarity and transparency and is useful to the company to improve the services and products offered over time.

Burglar alarm system compatible with Alexa, Google Home and IFTTT

Today with the new systems iAlarm-XR^® it is possible to control the alarm system with your voice by integrating the alarm system with home automation, in fact all the iALARM-XR control units^® are already compatible with the protocol IFTTT, Google Home, Alexaetc., there is no need for any configuration, external dongle or subscription.

iALARM-XR® Voice Commands

Simply set the voice command to integrate the alarm system, it will be possible to arm, disarm and partially arm the alarm system through a simple voice command, it is also possible to program the alarm system so that it automatically turns on when no one is at home and turns off when someone returns.

iALARM-XR® Burglar Alarm compatible with Alexa, Google Home and IFTTT

Thanks to the use of Google Home, Alexa and IFTTT with iALARM-XR^® it will also be possible to automatically activate or deactivate the alarm based on your habits (for example “when the sun sets set the home mode”, “when the cleaning lady arrives disarm only certain sensors”, and many other partializations of the system). Furthermore, with this system it will also be possible in the event of gas or water leaks to close a solenoid valve.

End of Article

THE EDITORIAL TEAM RECOMMENDS

If you are about to buy a burglar alarm for your home on the site www.antifurtocasa365.it you will be able to consult numerous guides and manuals.

Among the most recent innovations we can point out the new control units iALARM-XR a multi frequency.